DISCNT USE 5905-00-087-1123,DISCNT USE 5905-00-087-1123
1
32B MANUAL ACTUATED, COAXIAL
NOT ESTABLISHED
0.535 INCHES NOMINAL
0.187 INCHES NOMINAL
0.500 INCHES NOMINAL
0.422 INCHES NOMINAL
0.075 INCHES NOMINAL
0.078 INCHES NOMINAL
0.020 INCHES NOMINAL
0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM
0.200 INCHES MINIMUM AND 0.270 INCHES MAXIMUM
0.500 INCHES NOMINAL
3C ROUND, SLOTTED
BEARING
SINGLE SHAFT
9000.0 NOMINAL
10.00 INCH-OUNCES
0.200 INCHES NOMINAL
0.513 INCHES MINIMUM AND 0.526 INCHES MAXIMUM
2
RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE
UNTHREADED HOLE
0.100 INCHES NOMINAL
NONMETALLIC SHAFT
25.000 KILOHMS SINGLE SECTION
9000.0 NOMINAL
0.100 INCHES NOMINAL
125.0 SINGLE SECTION
-100.0 TO 100.0 SINGLE SECTION
1.0 FREE AIR SINGLE SECTION
-10.0 TO 10.0 SINGLE SECTION
CLUTCH
70.0 SINGLE SECTION
A SINGLE SECTION
87557-4V15699 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING)
