| VERNITRON CORP VERNITRON CONTROLS DIV | |
| 8533.40.0080 | |
| AIRCRAFT LAUNCH & RECOVERY EQUIPMENT (ALRE) SYSTEMS,FORRESTAL CLASS CVN | |
| 1 | |
| 5B CYLINDRICAL SERVO MOUNTED | |
| NOT ESTABLISHED | |
| 1.56200 INCHES MAXIMUM | |
| 0.06200 INCHES NOMINAL | |
| 1.727 INCHES MAXIMUM | |
| 1.750 INCHES MAXIMUM | |
| 0.07800 INCHES NOMINAL | |
| 1.767 INCHES MAXIMUM | |
| 0.125 INCHES NOMINAL | |
| 0.750 INCHES NOMINAL | |
| 0.977 INCHES MAXIMUM | |
| 2.120 INCHES MAXIMUM | |
| 1.76700 INCHES MAXIMUM | |
| 0.09300 INCHES NOMINAL | |
| 1C ROUND | |
| SINGLE SHAFT | |
| 165.0 MINIMUM AND 175.0 MAXIMUM | |
| CLAMP RING | |
| NONMETALLIC SHAFT | |
| 8.5 KILOHMS SINGLE SECTION | |
| 180.0 SINGLE SECTION | |
| 360.0 NOMINAL | |
| 85.0 SINGLE SECTION | |
| -300.0 TO 300.0 SINGLE SECTION | |
| 4.0 FREE AIR SINGLE SECTION | |
| 1 SINGLE SECTION | |
| -5.0 TO 5.0 OHMS SINGLE SECTION | |
| -5.0 TO 5.0 SINGLE SECTION | |
| CONTINUOUS MOTION | |
| 4250.0 SINGLE SECTION | |
| 20.0 SINGLE SECTION | |
| 80020-41297 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) | |
| 4 TAB, SOLDER LUG |
