| VERNITRON CORP VERNITRON CONTROLS DIV | |
| 8533.40.0080 | |
| AIRCRAFT, FREEDOM FIGHTER F-5 | |
| 4 | |
| 5B CYLINDRICAL SERVO MOUNTED | |
| 0.74950 INCHES MINIMUM AND 0.75000 INCHES MAXIMUM | |
| 0.06000 INCHES NOMINAL | |
| 3.174 INCHES MAXIMUM | |
| 0.749 INCHES MINIMUM AND 0.750 INCHES MAXIMUM | |
| 0.06000 INCHES NOMINAL | |
| 0.875 INCHES MAXIMUM | |
| 2.354 INCHES MAXIMUM | |
| 0.9825 INCHES MAXIMUM | |
| 0.87500 INCHES NOMINAL | |
| 0.06000 INCHES NOMINAL | |
| 1C ROUND | |
| 1.00 INCH-OUNCES | |
| CLAMP RING | |
| 4.000 KILOHMS 1ST SECTION AND 4.000 KILOHMS 2ND SECTION AND 4.000 KILOHMS 3RD SECTION AND 4.000 KILOHMS 4TH SECTION | |
| 360.0 NOMINAL | |
| 160.0 SINGLE SECTION | |
| 2.0 FREE AIR SINGLE SECTION | |
| -10.0 TO 10.0 1ST SECTION AND -10.0 TO 10.0 2ND SECTION AND -10.0 TO 10.0 3RD SECTION AND -10.0 TO 10.0 4TH SECTION | |
| CONTINUOUS MOTION | |
| SINGLE SECTION 360 DEG SINE-COSINE | |
| 85.0 SINGLE SECTION | |
| 19315-1981405 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
