| NORTHROP GRUMMAN SYSTEMS CORPORATION | |
| DISCNT USE 5962-01-250-6216,DISPOSAL,DISCONTINUED W/O REPLACEMENT,DISCNT USE 5962-01-250-6216,DISCNT USE 5962-01-250-6216 | |
| 8542.90.0000 | |
| 0.750 INCHES MINIMUM AND 0.795 INCHES MAXIMUM | |
| 0.245 INCHES MINIMUM AND 0.300 INCHES MAXIMUM | |
| 0.120 INCHES MINIMUM AND 0.195 INCHES MAXIMUM | |
| 1000.0 MILLIWATTS | |
| -55.0 TO 125.0 DEG CELSIUS | |
| -65.0 TO 150.0 DEG CELSIUS | |
| HERMETICALLY SEALED AND MONOLITHIC AND POSITIVE OUTPUTS AND HIGH SPEED AND W/ENABLE AND BIPOLAR AND 3-STATE OUTPUT AND W/BUFFERED OUTPUT AND W/DECODED OUTPUT | |
| CERAMIC AND GLASS | |
| DUAL-IN-LINE | |
| TRANSISTOR-TRANSISTOR LOGIC | |
| 13 INPUT | |
| M0-001-AG JOINT ELECTRON DEVICE ENGINEERING COUNCIL | |
| SOLDER | |
| -1.5 VOLTS MINIMUM POWER SOURCE AND 5.5 VOLTS MAXIMUM POWER SOURCE | |
| 40.00 NANOSECONDS MAXIMUM PROPAGATION DELAY TIME, LOW TO HIGH LEVEL OUTPUT AND 40.00 NANOSECONDS MAXIMUM PROPAGATION DELAY TIME, HIGH TO LOW LEVEL OUTPUT | |
| RAM | |
| UNKNOWN | |
| 97942-649A824 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) | |
| 16 PRINTED CIRCUIT |
