Manufacturer:GENERAL DYNAMICS MISSION SYSTEMS, INC.
Item Name:CIRCUIT BREAKER
Part Number:29-501360-13
Cage:04655
Product Detail
GENERAL DYNAMICS MISSION SYSTEMS, INC.
REV OF P/C Z 5925-00-825-9164
8536.20.0040
AIRCRAFT, STRATOLIFTER C/KC-135,AIRCRAFT, AWACS, E-3A,AIRCRAFT, F-16,SPACE BASED INFRARED SYSTEMS (SBIRS) MISSILE CONTROL STATION,ENGINE, AIRCRAFT T-64,ENGINE, AIRCRAFT T-58,ENGINE, AIRCRAFT T-400,ROCKET SYSTEM LAUNCH PROGRAM, RSLP ( MISSILE, MX, PEACKEEPER,MISSILE SYSTEM, AEGIS SURFACE (SMS) MK 7,SUPPORT EQUIPMENT, B-52 AIRCRAFT,CONSOL PSE,SHOP EQUIPMENT, GENERAL PURPOSE REPAIR, TRLR, SEMI-MOUNTED,SHOP EQUIPMENT, ORGANIZATIONAL REPAIR LIGHT, TRUCK-MOUNTED,AN/WSC-6 SHF SATCOM RADIO,TICONDEROGA CLASS CG (47),LARC-V A1/A2,MT WHITNEY LCC-20 CLASS,RADAR SET (AN/TPS-63B),RADAR (HIGHPAR) AN/GPN-22(V),FORRESTAL CLASS CVN,NIMITZ CLASS CVN,ARLEIGH BURKE CLASS DDG,WASP CLASS LHD / AMERICA CLASS LHA,WHIDBEY ISLAND CLASS LSD,CONSOLIDATED GROUND SUPPORT EQUIPMENT,RADAR SYSTEM AN/VPQ-1,AN/SPQ-9B RADAR (TRADITIONAL),GROUND/AIR TASK ORIENTED RADAR (GATOR),GROUND WEAPONS LOCATING RADAR (GWLR),U-2 AIRFRAME,BALLISTIC MISSILE DEFENSE (BMD),AN/UYQ-70(V) ADVANCE DISPLAY SYSTEM(ADS),AVIATION ENGINE TEST SYSTEMS (AETS)
0.1177 TO 0.1214 INCHES
8C MULTIPOLE-MULTIPLE ACTUATOR TYPE
2.510 INCHES MAXIMUM
2.156 INCHES MINIMUM AND 2.344 INCHES MAXIMUM
1.660 INCHES MINIMUM AND 1.960 INCHES MAXIMUM
0.719 INCHES MINIMUM AND 0.781 INCHES MAXIMUM
2.046 INCHES MINIMUM AND 2.078 INCHES MAXIMUM
0.719 INCHES MINIMUM AND 0.781 INCHES MAXIMUM
MODERATELY RUGGED
0.109 INCHES MINIMUM AND 0.171 INCHES MAXIMUM
2.553 INCHES MAXIMUM
3
MAGNETIC BLOWOUT
6 THREADED HOLE
GENERAL PURPOSE WAREHOUSE
32
15.0 AMPERES AC ALL LOCATIONS
240.0 AC ALL LOCATIONS
1000.0 AC ALL LOCATIONS
OVERCURRENT ALL LOCATIONS
MAGNETIC ALL LOCATIONS
TIME DELAY ALL LOCATIONS
115.0 ALL LOCATIONS
MANUAL
TRIP FREE
3 TOGGLE
TRIP-RESET
AT EACH POLE
ONE, TWO, AND THREE LINKED
SERIES TRIP ALL LOCATIONS
0.138 INCHES
2.200 MINIMUM AT 200 PCT ALL LOCATIONS AND 20.000 MAXIMUM AT 200 PCT
FUNGUS RESISTANT AND MOISTURE RESISTANT
60.0 ALL LOCATIONS
PLASTIC
81349-MIL-C-55629 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
