Company: SENSATA TECHNOLOGIES, INC.
Phrase Statement:
Schedule B: 8536.20.0040
Weapon Systems: JOINT STARS TARGET RADAR SYSTEM
BODY STYLE: 4B MULTIPOLE-SINGLE ACTUATOR TYPE BUSHING LENGTH: 0.220 INCHES MINIMUM AND 0.280 INCHES MAXIMUM BODY LENGTH: 2.200 INCHES MAXIMUM BODY WIDTH: 2.250 INCHES MAXIMUM BODY HEIGHT: 2.125 INCHES MAXIMUM CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO LENGTH: 1.471 INCHES MINIMUM AND 1.501 INCHES MAXIMUM CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO WIDTH: 0.735 INCHES MINIMUM AND 0.751 INCHES MAXIMUM DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH: 1.780 INCHES MINIMUM AND 1.840 INCHES MAXIMUM DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH: 0.735 INCHES MINIMUM AND 0.751 INCHES MAXIMUM FRAGILITY FACTOR: MODERATELY RUGGED POLE QUANTITY: 3 MOUNTING FACILITY TYPE AND QUANTITY: 6 THREADED HOLE STORAGE TYPE: GENERAL PURPOSE WAREHOUSE THREAD QUANTITY PER INCH: 32 MAXIMUM CONTINUOUS LOAD CURRENT RATING PER POLE: 10.0 AMPERES AC ALL LOCATIONS OPERATING VOLTAGE TYPE AND RATING PER POLE IN VOLTS: 200.0 AC ALL LOCATIONS MAXIMUM INTERRUPTING CAPACITY CURRENT TYPE AND RATING PER POLE IN AMPS: 1500.0 AC ALL LOCATIONS CIRCUIT PROTECTION TYPE: OVERCURRENT ALL LOCATIONS TRIP RELEASE METHOD: THERMAL ALL LOCATIONS TRIP RELEASE CHARACTERISTIC: TIME DELAY ALL LOCATIONS ULTIMATE TRIP RATING OF CONTINUOUS CURRENT RATING PER POLE IN PERCENT: 150.0 ALL LOCATIONS RESET METHOD: MANUAL MAIN CONTACT TRIPPING MECHANISM TYPE: TRIP FREE MANUAL ACTUATOR TYPE AND QUANTITY: 1 PUSH-PULL ACTUATOR FUNCTION: TRIP-RESET ACTUATOR POSITION DESIGNATION: AT POLE TWO INTERNAL TRIP RELEASE CONFIGURATION: SERIES TRIP ALL LOCATIONS NOMINAL THREAD SIZE: 0.138 INCHES TRIP DELAY TIME IN SECONDS PER RATED CONTINUOUS CURRENT: 10.000 MINIMUM AT 200 PCT ALL LOCATIONS AND 65.000 MAXIMUM AT 200 PCT INCLOSURE PROTECTION TYPE FOR WHICH DESIGNED: GENERAL PURPOSE TRIP RELEASE AMBIENT TEMP RATING: 25.0 DEG CELSIUS NOMINAL ALL LOCATIONS UNPACKAGED UNIT WEIGHT: 0.500 POUNDS NOMINAL FREQUENCY IN HERTZ: 400.0 ALL LOCATIONS MATERIAL: PLASTIC PRECIOUS MATERIAL AND LOCATION: TERMINAL SURFACES SILVER PRECIOUS MATERIAL: SILVER TEST DATA DOCUMENT: 81205-BACC182L10A DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) THREAD SERIES DESIGNATOR: UNC TERMINAL TYPE AND QUANTITY: 6 SCREW
